Posey Bed 8070 Manuale Utente

8070 Assembly InstructionsPosey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USA Phone: 1.800.447.6739 or 1.626.443.3143 • Fax: 1.800.767.3933 or

10 Posey Bed - 80702. Insert a 1 ¼” Carriage bolt (Hardware Packet B) into each hole (Figs. 4-D).3. Place the clamp onto the bolts (Figs. 4-E &

Posey Bed - 8070 11Left Foot Post1. Align the left foot post (Part M) with the holes on the frame located on the left side, foot of the bed (Fig. 4

12 Posey Bed - 8070Long Rail AssemblyMaterials:• Hardware Packet A• Part G (2)• 9/16” wrench This section requires two people.1. Hold and align

Posey Bed - 8070 134. Repeat on the other side of the rail.5. Repeat with the second long rail between the right head and right foot posts (Parts I

14 Posey Bed - 80704. Repeat with the other long foam pad on the other side (Fig. 6-B).5. Open the slot on a long foam pad (Part F) and wrap around

Posey Bed - 8070 157. Unzip all horizontal rail zippers-both the long and short sides.8. Beginning with one long side, wrap the top rail section a

16 Posey Bed - 8070Bed AssemblyCanopy Head End Flap Installation1. Locate the Canopy Head End Flap at the head of the bed (Fig. 8-A).2. Open the h

Posey Bed - 8070 17Mattress InstallationMaterials:• Part Q (1)• Assembled Bed Frame with Canopy If not using the Posey Bed 8070 mattress, a mattr

18 Posey Bed - 8070Power Cord AttachmentNOTE: If not already done, retrieve the power cord attachment taped to the underside of the bed.1. Attach t

Posey Bed - 8070 19Bed AssemblyAssembly Check1. The bed assembly is completed (Fig. 11-A).Check:✔ Bed frame feels secure with no loose or moving pa

2 Posey Bed - 8070IntroductionSafety Instructions ... 3Safety Precautions ...

20 Posey Bed - 8070Replacement Parts8070 Replacement PartsReplacement Part Availability: Part No. Description Qty. Cat. No. A, B, C, D Hardwar

Posey Bed - 8070 21Limited WarrantyPosey Limited WarrantyWhat Does this Warranty Cover?Posey warrants to the original purchaser that the Posey Bed 8

22 Posey Bed - 8070Technical ServicePosey Technical Service:We are happy to assist you between the hours of 6 AM and 5 PM Pacific Time, USA. Please c

Notes

M6193 REV C 053113© 2013 Posey Company. All rights reserved.Posey Company • 5635 Peck Road, Arcadia, CA 91006-0020 USAPhone: 1.800.447.6739 or 1.62

Posey Bed - 8070 3Safety Precautions Warnings, Cautions, and Notes are provided throughout this manual to indicate levels of potential hazards or he

4 Posey Bed - 8070IntroductionPower Supply RequirementsModel: Posey Bed 8070Rated voltageand current: 108-132 VACFrequency: 60HzCurrent Rating:

Posey Bed - 8070 5InstallationGather assembly tools not included in the boxes.General InformationThis section provides detailed installation and set

6 Posey Bed - 8070Bed AssemblyUnpacking the PartsConfirm that all parts have been included with the bed. If any items are missing or damaged, please

Posey Bed - 8070 7Bed Assembly3. Press firmly to seat the caster leg frame (Part J) completely down into the wheel receiver (Fig. 2-C).4. Insert the

8 Posey Bed - 80709. Tighten with a 9/16” wrench (Fig. 2-G). DO NOT over tighten.10. Repeat until all four square plugs have been installed.7. Pla

Posey Bed - 8070 9Transfer Brake AssemblyMaterials:• Hardware Packet D• Part O (4)• 7/16” wrench (2)1. Align the top and bottom holes on the Tra